How to Unlock Ryobi Miter Saw

How to Unlock Ryobi Miter Saw

Unlocking a Ryobi miter saw is not rocket science. But for a newbie, unlocking the saw might be challenging and risky at the same time. Good news is that when you know how to unlock Ryobi miter saw properly, it becomes a cup of tea. 

One of the main reasons why the Ryobi circular miter saw has such popularity is its cutting angels. You can cut with the respect to your workpieces and saw blades angle smoothly. The locking mechanism is there to protect that blade so that you can lock and carry it safely when not in use.

If you are a newbie and going to use Ryobi saw, this guide is a must for you. We are going to guide you to the right process so that unlocking the saw becomes much easier and safer for you.

How to unlock Ryobi miter saw

Ryobi miter saw comes into different models and versions. Not all versions offer the same unlocking mechanism. We will show you the right methods so that you can unlock all the models. The methods are simple and anyone can do it. So let’s see How to unlock the Ryobi miter saw.

Unlock the head

Let’s start from the top. The headlock is designed to hold special parts and mechanical ankles. To ensure proper unlocking. Make sure to follow the guide below for unlocking the head.

  • Find the lever or a pin. You will find it around the center point of the general saw and inside for the siding model.
  • Apply some pressure on the pin.
  • Pull to unlock the head

Unlock the handle lock or blade lock

Unlocking the handle lock will open the blade. The lock is there to lock the blade so that you can safely move it. Here is the guide to unlocking the blade lock.

  • Find the lock pin near the handle hinge
  • Press the pin slowly
  • Then release the blade slowly

Unlock the slide

If your saw has a slide design, then you might have this slide lock. The slider is there to cut wider woods compared to blades’ widths. Without this design, you have cut the work materials from both sides. It will take time and effort. So having a slider is an advantage for sure. Follow the steps below to unlock the slides.

  • Find the knob of the slide
  • Twist the knob until
  • Keep sliding until you smoothly slide the arm and the blade
  • Set it to your required position and lock it once again

Unlock the base

When you purchase a Ryobi miter saw, you get a base or table. The base or table is adjustable and you can set it to the desired position by unlocking it. To unlock the base, follow the process below.

  • Find the knob, you will find it on the front side.
  • Hold the knob with one hand
  • Now twist it.
  • Use your other hand to position the table
  • Now twist the knob to set it to the desired position

Unlock the bevel

The bevel angle helps you to bring versatility to your jobs. However, not all the miter saws have this amazing bevel angling function. But if your one has this function, follow this guide to unlock and adjust the bevel.

  • Find the bevel pin or key
  • If it is a knob, twist it. If it is a pin, press it
  • Then adjust the bevel angle
  • Get the perfect angle by locking the bevel once again

Unlock spindle

The final type of lock is a spindle lock. You need to lock/unlock the spindle to change or replace the blade of your saw. To change your blade,

  • Lock the spindle since it stays unlock
  • The blade will stop moving
  • Now take a wrench and take the bolts out
  • Replace your blade
  • Unlock the spindle

Let’s see a video how to unlock Ryobi Miter Saw –

Some Additional Tips for Better Use

Some Additional Tips for Better Use

When locking or unlocking the saw, you should always maintain safety and precautions. Here are some tips for you.

  • Always read the user manual before using the saw and do accordingly
  • Make sure to wear gloves, goggles, helmets, and boots for safety purposes.
  • Turn off the machine and plug off it- this part is mandatory
  • Try not to twist the knob too much since it may lock the knob
  • Make sure to lock the system after unlocking
  • Hire an expert if you find it inconvenient, risky, or troublesome

Frequently Asked Questions About Ryobi Miter Saw

After reading the unlocking processes, having some questions in mind is common. Follow this question-answer part to find your answers.

How do you lock a Ryobi circular saw?

You can simply lock your Ryobi circular saw by twisting the knob or pressing the pin. For different locks, you will get different pins and knobs in different positions of the saw.

How do you unlock a Ryobi compound miter saw?

Start unlocking your Ryobi compound miter saw by finding out the lock pin. Then simply press it to let the pivot joint float freely and release the saw arm and you are done with it.

How to replace blade on Ryobi circular saw?

To replace the blade on your Ryobi circular saw, lock the spindle and use a wrench to remove all the bolts. Then simply replace the blade and screw those removed bolts by using the same wrench. You are done replacing the blade.


A tool is no use to you when you don’t know the proper use. That’s why we have portrayed How to unlock Ryobi miter saw to ensure proper use. In this article, we have talked about different locks located in different positions for different purposes. Make sure you follow all those processes to ensure a perfect unlocking.

Unlocking the system properly will help you get more advantages compared to others. However, follow the safety measurements always since it comes first always. You don’t want to risk your life for idleness. Be smart and enjoy all the features of the miter saw.

Click Here to Leave a Comment Below 0 comments