How To Use A Pole Saw With Rope – Some Easy Steps
Pole saw has eliminated the necessity of rope and ladder since its arrival. But, professionals have grown their interest in the rope and pole saw nowadays. However, do you know how to use a pole saw with rope?
It’s easy as you need to simply attach the rope with the target steam primarily. Then, the other end of the rope requires holding by someone until the work of the pole saw is done.
Applying a pole saw blade to any limb is theoretically easy. But, it requires skills when you’ll go for different types of cuts. Performing a vertical cut successfully is required to make the final cut easy.
When should you use a rope with a pole saw?
You don’t need to use a rope with a pole saw all the time. Let’s see what’s the best time to do this.
If the desired branch is heavy, it shouldn’t land directly on the ground. Using a rope is one of the easiest as well as most effective ways to ensure a safe landing.
There might be brittle soil all over the area of the falling position of the tree branch. If you allow the branch to land directly, the surface will be extremely damaged. To reduce the damage, using a rope is the best way.
Someone may cut their tree branches to sell them. They might be high in price and require fewer damages to the body. That’s why you should use a rope to make a safe landing on the ground.
Some tree branches may appear in a critical position. Falling down from those branches may cause fatal damage to the unavoidable obstacles. Better, use a rope to bring it down safely.
How To Use A Pole Saw With Rope – Step by step guide
Using the pole saw with a rope makes your project much easier. Here you know about the detailed steps of using a pole saw with rope for three kinds of pole saws.
How to use a manual pole saw with rope
First, start with the manual pole saw. Here are the steps to use a manual pole saw with rope.
Step:1- Making the blade adjustment
start by adjusting the blade with the pole saw to use it. After that, extend the pole saw according to your necessity. Most manual pole saws come with two or three extensions. By using the right button on your pole saw, you can easily do that.
You can also read – How To Sharpen Fiskars Pole Saw Blade – 3 Easy And Simple Ways
Step:2- Taking the right position & attaching the rope
Before attaching the rope with your pole saw, you need to take the correct position. A large number of people die from falling tree branches on their bodies. So, select and stand in a safe place to operate your pole saw from there. Also, attach the rope with the desired branch to ensure its safe landing.
Step:3- Starting with small branches
The small and thin branches require less trimming and easily fall apart. For better cutting, using a rope with the pole saw is mandatory. To cut with a pruner, using the rope is the best option. All you need to do is adjust your pruner to the bottom part of the desired branch. Now, observe if the pruner is in the right direction. After setting up everything, pull the rope instantly. The more efficient cut of the desired branch will be executed within a moment.
Step:4- Making a groove
Newbies should stroke slowly on the branch to ensure the pole saw’s safe control. Making a groove ensures a more decent cut than traditional cuts. In the meantime, just apply the pole saw like other times, not with extreme pressure. This process talks about stroking perpendicular to the branch with the pole saw blade.
Step:5- Making the final cut
To ensure the final cut, increase your stroke rate gradually. If you haven’t made a slot in the previous step, make it now. It’ll help to stick the saw in the same place. The slot will be highly effective in cutting tree branches quickly. When you reach the ultimate point, the branch will fall down.
How to use an electric pole saw with rope
It’s time to discuss the electric pole saw. Let’s see how to use an electric pole saw with rope.
Step:1- First thing first: cleaning the area
First, clearing the work area is mandatory. Start by removing lower limb branches from the desired tree. You can go for a ladder to accelerate the cleaning process. Remember, all the trip hazards including electric lines should be kept in a safe place.
Step:2- Planning before cutting
Locate the pruning branch and determine where to start. Also, determine where the branch will fall down. If you start trimming from the horizontal surfaces of the branch, your tree will get a good shape.
Step:3- Positioning yourself
Make a safe position of yourself far apart from the limbs. The standing point should be combined with your chest height. Most pole saws are expandable. So, expand it and move it towards the desired branch after taking a position.
Step:4- Attaching the rope
Now, attach the rope to the target branch of the tree. Twaddle the rope with the large branch to ensure its safe landing. The other part of the rope should be held by a group of strong people. You can keep the midpoint of the rope on another branch of the tree.
Step:5- Start to cut branches
The final cutting is similar to the manual pole saw. You need to gradually increase the speed of the blade. First, perform some straight cuts of the branch. Then, ensure a flat cut to make a notch. When your job is almost done, the branch will start to fall. The people holding the rope have to ensure a safe landing at this stage.
How to use a gas pole saw with rope
Now, you’ll know a detailed overview of how to use a gas pole saw with rope. It’s almost similar to the electric pole saw.
Step:1: Take a convenient position
Grip the handle snugly and make a comfortable position. Avoid the risky areas where the branch can fall down. Remove all the obstacles like electric lines from the working area.
Step:2- Tie the rope
Tie the rope similarly to what you’ve done to the electric pole saw. Ensure that the holders of the rope are strong enough. Otherwise, the branch may create severe damage if it’s extremely weighted.
Step:3- Adjusting the pole length
First, assume the distance of the desired branch. Don’t set the pole saw length unnecessarily long unless you want to shift your position. Generally, a gas pole saw is expandable up to 12 feet long.
Step:4- Run the gas pole saw
Start the pole saw blade using the starter rope. Establish a balance between the machine & your body with one hand. The other one should be used to pull the starter rope.
Step:5: Perform jump cuts
Jump cuts help to cut from the beneath of the tree branch. Along with reducing the branch weight, it makes the further cuts easier. Apply the pole saw blade in the right place to execute this step.
Step:6- Make perpendicular or vertical and final cuts
Hold the pole saw perpendicular to your hand. Then, perform deep cuts for securing the final cut. Apply sufficient pressure to deal with a thick limb. You can also try vertical cuts. It’ll help to make the final cutting much easier.
It’s all about performing the cut from the vertical position. After that, apply the pole saw to perform the final cut. Don’t put excessive pressure. You need to stay alert as you can warn the rope holders just before falling on the branch.
Safety measurement to follow while using a pole saw with rope
You should follow these safety measures while using a pole saw with rope.
- Be alert about letting go of the end part of the pole when using the saw. It’s because the blade’s sharp part can cause serious injury.
- When cutting a branch, ensure that your hand is out of the pole saw’s way. The sharp blade is capable of even cutting your fingers.
- You may need to use a ladder while using a pole saw. It’s suggested not to place a pole saw on top of a ladder. This action will raise the center of gravity. As a result, the ladder becomes less stable.
- Maintain a safe distance from the branch undercut. Falling the tree branch unexpectedly may damage your head acutely.
- Wearing eye protection, helmets and gloves are encouraged. Otherwise, your eyes, palms, and skull may get injured.
Now you have a clear idea of how to use a pole saw with rope. Applying a pole saw to any steam is a difficult task as you need to deal with the sharp blade. Using the rope to make the desired steam’s landing successful is the other hard part.
As you can’t avoid the hard parts, don’t forget to equip yourself with safety materials. Tighten the rope with the target steam precisely to avoid any damage.
The rope has nothing to do with your primary cuts. With a pole saw and skills, you can make accurate cuts of a tree branch. And, a perfect final cut by a pole saw can only allow the limb to land.