How to Sharpen a Pole Saw Blade | The Advanced Guide From a Pro
The must-have equipment for cutting limb or trimming the tree is pole saw blade. Besides, pole saw knife is ideal for cutting dry wood equipment for its some durability and superior sharpness. This fixed blade is now found in every Florida citizen’s house due to its excessive use.
But, every metal equipment’s need to repair, whenever it loses its sharpness ability and fails to provide the best service. Now, the query is to sharpen a pole saw blade easily at home.
The fact is, it is quite easy to sharpen a pole saw blade, but, it is an enduring process. If you have enough patience, then come to do otherwise hire any professionals. But we recommend you to do this as your own. For the very first time you may face it a little bit problematic but trust me, if you once sharpen your pole saw blade properly, after every time you will enjoy the task. So please try it now.
Before Start Check Weekly Top 10 Selling Pole Saw on Amazon
No products found.
How to Sharpen a Pole Saw Blade -Sharpening Procedures :
There are lots of saw blades on the market, and it has incredible popularity. Though it has Japanese steel and superior durability, it may sometimes cause rust.
Meanwhile, whenever you use the pole saw blade and keep it for a long time, and after six months later, whenever you need to use it again then you will mark that, it has rust on its whole body, or it loses its sharpness already. For this reason, it is quite unable to trim or cut the tree branches. So, what to do? Just follow few steps and again get your pole saw blade as a new one.
Here are a few steps about How to sharpen pole saw blade. Please read it carefully and makes your pole saw blade again sharper for daily use purpose. By doing this, trust me, you will get the perfect sharpness, and it will help you to cut any kinds of woods within a minute. Now check it out.
Step 1: cleaning the dirt
First of all, you need to clean the pole saw blade with a brush wire. Clean all the tree debris and the dust carefully, and ensures that there is no little dust on it. No, if you find on it, any kinds of oily buildup then lease use the best greaser products on it. Besides, you can also use a rag on it. Now if it is possible, you need to remove it from its pruner pole carefully. You may notice that here, sometimes the head is unscrewed and it is quite open from the pole.
Step 2: Clamp the saw blade
The second step is, now you need to clamp the saw blade with a table or and box surface. And make sure it is tight enough. Next, you require keeping the serrated edge at the top position as it facing up. So, clamp the saw blade on a table vase with the help of serrated edge parts.
Step 3: Placing the sharpen rod into the Groove
This is the primary level to grinding the pole saw blade. In this step, you need to place the sharpening rod carefully in the notch between the two teeth. Now, you tend to push the sharpening rod forward and also take it away from the metal and the sharpen blade as well. Now, you should repeat this process about 6 to 7 times. Carefully repeat these steps until it becomes burr and provides curled metal develops. It will contain sharpness on the back side of the saw blade. You tend to re-position the rod carefully and also all-time press it forward. Be aware that, never to saw back and don’t put it between the pole teeth.
Step 4: Friction the Sharpening rod
This step will increase the sharpness intensity so much. So, this step is so much important. If you want to make your pole saw blade much sharper, then you should follow this step carefully and also maintain every single part. Otherwise, your pole saw knife would not be so much more intelligent, and you may not be able to cut o trim any branches of the trees. So, rub the rod or the large file in opposition to the back portion of the blade as it can file away the rattle. At the same time, the rattle should fall off, and its fall off requires only 1 or 2 passes as well.
Step 5: Greasing the blade edges
Another significant step is that, if you want more brightness on it then you need to grease it properly. In this case, you require spray or any lubricating oil. If you feel any problem to choose the right oil or lubricant, then we will recommend the Teflon based dry lubricant for you because it works correctly on the blade. This lubricant will protect the metal bare as well from any rust.
Tips and Guidance
Always select the sharpening rod, which can fit appropriately in the groves f the table. At the same time, the rod needs to much longer as it can file away correctly. Whenever you choose a small rod, then it will be not appropriate. We recommend diamond file, and the whetstone file for sharpening the edge as these have the remarkable ability.
Sometimes, it cases hazard that, it’s too much hard to remove the saw blade from the pole. For this reason, you need to grip the knife firmly in the table vase. Now take an angle and lay down the pole as the vise and then tighten it properly. It means, the blade can hold at the different directions, but you can safely sharpen it due to it fixed in a position.
Conclusion:
So what you learn after reading this important guidance about how to sharpen pole saw blade? Probably you enjoy this article and must you should apply this process at your home. It is a natural process. So, you can do it properly without any types of hazards.
Last update on 2024-12-01 / Affiliate links / Images from Amazon Product Advertising API
