Gas Pole Saw Vs. Cordless Pole Saw: How To Pick The Perfect Saw

Can you deny the importance of a pole saw while pruning the shrubs of your garden trees? A pole saw is an effective tool when you are working in your garden.

However, the most buzzing debate among the gardeners is – which pole saw to pick? Gas-powered or Cordless?

Both types of pole saws have thumbs up and thumb down features. And it is a challenging task to pick the best one from these two.

In this article, we have created a comparison between a gas pole saw and cordless pole saw. And based on the comparison, we will make a final decision.

So, without further ado, let’s give a closer look.

Gas-powered Pole Saw

From the name itself, you are getting an idea of the power source of this type of pole saw. All types of pole saws have been operated in this way since conventional time.

They are powerful, and because of that, many arborists prefer to use them while pruning, trimming or cutting shrubs. And because of this feature, they gained the title of “kings of the castle.”

Gas-powered pole saws come with multiple sizes, and most of them contain 2 engines.

A combination of oil and gas is used to run this pole saw but in a ratio of 40:1 and 50:1.

But they have one drawback – a bit heavy.

Cordless Pole Saw

When it comes to flexibility, portability, and easy-to-use features, no other pole saw can beat a cordless pole saw.

Cordless pole saws are battery-powered, powerful enough to cut, trim and prune a thick branch comfortably.

As the teeth are quite sharp, these are usually attached to a rotating chain. When the chain rotates, the sharp teeth cut trees and branches without any problem.

Other activities like bucking, lambing, filling, etc. also can be done using a cordless pole saw.

Comparison between Gas Pole Saw and Cordless Pole Saw

To reach the final result, intently read below gas pole saw vs. cordless pole saw comparison.

Weight

If your pole saw weighs too much, you will be unable to continue your pruning task continuously. You will have to stop and restart your task several times.

At this point, gas-powered pole saws are heavier than cordless pole saws.

Since pruning or cutting branches is not a 5 or 10 minutes’ job, you may feel hand fatigue when you use a gas-powered pole saw for an extended period.

On the other hand, because of the lightweight feature of a cordless pole saw, you will not face any problem handling them for a long time.

Safety

One of the problems that most of the pole saw user’s face is – kickback. When the guide bar comes into contact with any flying or foreign particles, it jerks up.

Controlling this sudden jerk up is hard to control with a powerful pole saw. And the situation can be worse when an inexperienced user handling a powerful pole saw.

At this point, a cordless pole saw is less powerful than a gas-powered pole saw.

Less power means chances of sudden jerk up is less. It means cordless pole saws are safe to handle.

Eco-friendly

Accomplishing a task on due time is significantly essential; at the same time, you must think about the environment too. Always pick a tool that creates fewer side effects on the environment.

Gas-powered pole saws emit harmful fumes and other pollutants in the environment. So arguably, they are damaging the ecosystem as well as polluting the environment.

So when you are looking for an eco-friendly pole saw, a cordless pole saw is a clear winner.

Power

Needless to say, the “kings of castle” is the clear winner at this point. Gas-powered pole saws are much powerful in handling thick branches. Because of this feature, many experts and professionals prefer gas-powered pole saw instead of a cordless pole saw.

Although gas-powered pole saws are weighty and handling them is a bit challenging, manufacturers introduce advanced technology so that a user can comfortably handle them. However, this weight is not a barrier for an experienced and skilled person who works with this tool.

In terms of performance, cordless pole saw can’t beat a gas-powered pole saw.

Flexibility

When you require to cover a wide area, stretched out with a lot of trees, a gas-powered pole saw will be the best solution.

Why?

Simply because they are powerful, and you can work with them for a longer period. However, that doesn’t mean you will not need to refill your pole saw with a sufficient amount of gas and oil. You have to refill the pole saw. But refilling is much convenient and quick in a gas-powered pole saw.

On the other hand, if cordless pole saws charge gets finished, it will take a minimum of 2 hours to get fully charged again. It means, at the time of a cordless pole charging, you will remain idle.

The bottom line?

Compared to a cordless pole saw, a gas-powered pole saw can handle a wide area, and it is much flexible to use for a long time.

Which one to pick? Cordless or Gas-powered?

So, which pole saw you should purchase now?

The fact is, depending on your preference and project, you should pick the best-suited pole saw.

A gas-powered pole saw will allow you to accomplish a massive and large project comfortably with its extensive power. It is specially designed to tackle the heavy-duty task.

On the other hand, if you need a pole saw to handle small projects efficiently, a cordless pole saw will be the best pick. This pole saw is suitable for homeowners or DIY enthusiasts.

Final Words

Whenever you purchase a pole saw, it is vital to learn what type of task it is going to handle. Moreover, you have to put on protective gear while working with a pole saw because of the sharp teeth.