How wide of a Board can a 12 inch Sliding Miter Saw cut
Have a 12 inch miter saw! Then you must have a query when you are up to a woodworking project, how wide of a board can a 12 inch sliding miter saw cut? How can you bring up the depth?
Well, if you want, a 12 ich sliding miter saw can cut seven and a half inches wider cut on almost every cut. It can differ by the model of the saw machine as it happens to the thickness of the amount.
You want to have the perfect width and depth on the wood; you have to know certain things. There are some tips and tricks you can use to make the cut much efficient and more accessible. Therefore, we are here to help you out. Have a look!
How wide of a Board can a 12 inch Sliding Miter Saw cut – More detailed
Sliding miter saws are much flexible when you bring in the broader cuts. Whether it’s crosscut or not, a 12-inch sliding table can cut 2 x16 wood in no time. Now, the cutting ability comes through some core facts of the saw. Here they are.
Bevel range
A sliding miter saw can work on a broader angle through the bevel angles. You can shift it quickly to any angle within 90 degrees. Also, you will find some odd ones with asymmetric ranges within them. It gives the proper flexibility to the broader cuts with the exact angles you need.
Detents
Positive detents are a powerful tool for every cut by the sliding miter saw. With it, you can cut any angle or size till to the end without any wobbling. It restricts the movement of the saw and locks till you release it.
Laser and fence
Most of the 12-inch sliding miter saw has a laser on the body. It shows you whether you are going as per the line you made or not. Therefore, you can have the shape you want along with the size more efficiently.
Lastly, the fence keeps the wood tighten and makes your cut without any jerking. Also, it helps the piece to stay steady on the transition of speed in the blade.
Tips for cutting Wider with a 12-inch Sliding Miter saw
Woodworking will be perfect as per your desire, but you have to be tricky here. Yes, you can’t do it faster than the work schedule, but you will have the one wanted. So, here are the tips for you that will give your work ideally.
Bring in the fence for safety
When you are using a sliding miter saw, the blade’s handle can have a worse wider offcut. Therefore, you should have a surficial fence with a piece of plywood before the cut. You have to attach to the saw’s fence and a board and screw them together. It will protect your every cut from the airborne and save your fingers.
Always have a proper miter table
Not all tables are the same Jobsite table for a 12-inch miter saw. Therefore, we prefer to have your sliding miter saw table so that you can feel comfy in every broader cut. It’s much easier to make a simple table for a sliding miter saw.
Hence, the height differs by the model as the base of the miter saw is different. But the 21 x 96 will be a perfect dimension for length and width. Then screw it on the base when you find out the measure. After that, mount the saw with all its bolts and screws.
Mark the area precisely
Mark the area with a marker where the blade will work and to it tightly. Most of the injuries happen for this error, so keep a sharp eye here. As it’s a 12-inch sliding miter saw we are talking about, you have to draw the line of 8 inches on both sides of it.
Pick the smaller pieces
No matter how the blade size is, always put the small pieces in the slide saw first. It does not just make you concentrate faster, also makes your hand ready for the bigger one.
Here comes a question, how will you cut a smaller one without any wobbling? Use a clamp on the piece of wood, even its ¼ inch thick wood scrap. It will hold the wooden piece till the end of the cut and make broader cuts much better.
Be aware of the blade guard
The blade guard is the tool that keeps the debris away from you. Also, you have to check it for proper maintenance of the saw blade. So, get a transparent one if your 12 inches sliding miter saw doesn’t have it. If anything gets in there and you don’t remove it, the blade can be jammed or work slowly for broader cuts.
Also, have a look at the blade. Otherwise, you can need a new blade in the middle of the DIY project. So, you must do the procedure of changing the blade more smoothly. Get tools like an onboard blade wrench and put it on the side of the table for instant backup.
Use the essential tools for the cut
A simple pencil can make your back bevel cut smoother only if you know about it. Just put the pencil under the molding when it’s on the miter joints, and it won’t touch the back. When you are up to having a 90-degree bevel or angle cut, it goes the same.
As we mentioned earlier about the minor cuts, you can use them as templates. Doing that can save you from the regular stoppage of sliding miter saw. These little tricks can bring out broader cuts spontaneously and finish off quicker.
Don’t cut all the same cuts together
Always use repetitive cuts when you are aiming at broader cuts. Yes, it will be a lengthy process, but rushing into another cut can make that worst. Hence, the laser can be pretty helpful as it makes the blade cut accurately on the spot over time. Also, push the power button only when the laser line is on your marker line.
Make the speed maximum when needed
It would help if you did not use the maximum blade speed in all cuts. When it’s about a broader board, you can hope in faster, but when it’s about trimming the more comprehensive piece, you can’t. Therefore, you have to bring the blade to the end where the piece is and raise the blade a bit. Then pull the trigger and get the blade closer slowly for the cut.
Dispose of the scrap after the cut
Finally, the broader cuts need a clean saw table after every single cut. Therefore, you have to put the scrap immediately. For a 12-inch sliding miter saw, you can do the trick.
Make a hole in the spot of the table there the saw and its belongings won’t arrive. Put a bin under the table by the hole and get the smaller scraps easily disposed of.
Safety tips
Your fingers will be relieved when your cut is finally finished on the table in any DIY projects. Therefore, proper safety measures are pretty necessary when it’s a 12-inch sliding miter saw. Here they are-
- Wear up all safety tools first, like safety goggles, dust masks, hearing protection, etc.
- Inspect the saw table precisely and repair any cracks before the saw machine gets on it.
- Check out all the sliding miter saw machine parts carefully and replace them if needed.
- Attach the saw machine to a waist height for a flexible work condition on the table. Screw the base real tight so that no shakiness occurs.
- Don’t turn on the machine if you are not sure about the position of the blade. Always make the adjustments before plugging in.
- Try to keep a combination blade on the sliding miter saw if it’s not on it. It will make the cuts efficient every time.
- Be careful about the blade speed. When you reach the maximum speed, always wait for the end of the rotation.
- You must plug off the power cord after you finish all the cuttings. Only then can you unscrew the machine from the table.
- Always keep clean the work table and the sliding machine. Otherwise, it can bring trouble when you need it the most.
Frequently Asked Question
Got more questions? Please check the answers below to find your questions.
How wide does a sliding Mitre saw cut?
Answer: A sliding miter can cut the maximum size possible according to the angle. It can cut 2 x 12 timber in 90 degrees pretty quickly.
Can a 12-inch miter saw cut a 6×6?
Answer: No, a 12-inch miter saw can’t cut a 6×6 dimensional wood because of its bigger blade size. But it can cut pretty decent crosscuts.
Will a 12-inch sliding miter saw cut a 4×4?
Answer: Yes, the sliding saw with a 12-inch blade can make 4×4 efficiently. Also, you can have angle cut through it significantly.
Can you put a 10-inch blade on a 12-inch miter saw?
Answer: Yes, you can. A 12-inch miter saw can easily use the 10-inch blade to bring up more versatility on the woodworking.
Will a 7-1/4 miter saw cut a 4×4?
Answer: If you want a perfect depth of 4×4 cut, a 7-1/4 miter can’t do that. It can go only half of it with miter saws.
Final verdict
Have you read all the facts we have discussed here? If so, you are now fully aware of how wide of a board can a 12 inch sliding miter saw cut! But you must read out the manual of the sliding saw to have a sharper view of the machine. Also, maintain the machine with proper safety and take a little break you need it. Always have a fresh start on woodworking.
Now, get going with the saw!
